Copyright © 2023 Wicks & Wax
A must have for all candle production. Regulates the
temperature of wax to ensure a proper pouring temperature.
Thermometers
Item # Description
Price
5979 Stainless Steel $11.95
w/Clip & Sleeve
-20°C - 100°C
0° - 220°F
101 Digital $9.85 ea
6” probe
-50° - 300°C
-58° - 572°F
5981 Stainless Steel $14.95
Large Dial w/Clip & Sleeve
-20°C - 100°C
0° - 220°F
Pouring Pots
Note: Stainless Steel pouring pots are recommended for
beeswax as beeswax will corrode Aluminum pots over time.
Item #
Description
Price
5344 Aluminum 1L Plastic Handle $16.35 ea
~1100grams (no measurements) 4 @ $13.90 ea
8 @ $13.08 ea
5321
Aluminum 2.6L Plastic Handle
$22.95 ea
~2700grams(no measurements) 4 @ $19.51 ea
8 @ $18.36 ea
069739
Stainless Steel 700ml $13.35 ea
4 @ $10.01 ea
069738
Stainless Steel 355ml $ 9.50 ea
4 @ $ 7.60 ea
069737 Stainless Steel 175ml
$ 7.80 ea
4 @ $ 6.24 ea
Mold Sealer
Item #
Size
Price
#81002
25grams $1.99ea
Re-useable putty used for
sealing the wick hole in
25 grams
Acrylic, Plastic, and Metal molds.
#MM0160
3”x3” square $0.79ea
Magnet Mold Sealer for
Metal Molds 3"x3" Square
Note: Does not work on
aluminum molds
Mold Stands & Clips
Holds 2 part plastic molds together and stands them upright.
Each Mold Stand includes two 6" clips. We also recommend
sealing the sides of the mold with masking tape if you have
problems with leaking.
Item #
Description
Price
MS6
Mold stand with two 6" clips
$2.98 ea
MC6
Pair of 6" clips
$0.80/pr
MC12
Pair of 12" clips
$1.75/pr
MC18
Pair of 18" clips
$2.45/pr
Funnels & Droppers
For adding Scent to wax, oil diffusers, or other bottles.
Note - The Droppers should not be left in the scent
bottle as after time it may corrode the rubber.
Item #
Description
Price
046162
Funnel 1.25” dia $0.39 ea
046163
Funnel 2” dia
$0.99 ea
820500
Droppers
$0.98 ea
- 0.8ml capacity
- 75mm long tube
*Lid does not fit any of our
scent bottles
Measuring Vials OUT OF STOCK
Plastic with Graduated measurements.
Item#
Price
200501 $18.35
Weighing Scale
5kg max weight. Measures in 1gm increments
Taper Candle Base Former
Item#
Price
3006 $74.95
OUT OF STOCK
Heat on a hot plate, insert
base of tapercandle to melt
the line pattern into the candle.
Excess wax drains out the side
spigot. Slight taper to base,
approx ⅞” dia at top to 13/16” dia at bottom.
Allows candle to fit snugly in standard candle holders.
Secure & center your wick in molds & containers. Fold edges
for a more secure fit. Clamps are now sold separately as they
are not required for container candles.
Wick Holder
Item #
Price
5837 $1.17 ea
Single Wick, 5” wide.
Clamp sold separately.
5839 $1.89 ea
Single or
Triple Wick
up to 8” dia
Clamps sold separately.
5838 $0.29 ea
Clamp for pillar molds
or unwaxed wicks.
Tacky Wax
Sticky microcrystalline wax & resin blend that does not
harden or dry out like glue. Use for adhering tabbed wicks
to containers, stick candles into holders, stick wax cutouts
onto candles, and more.
Thumb Drill
Use for drilling a wick hole in finished Macaron candles
(and other short candles). 4cm long x 2.5mm dia
Item # Price
2016000 $1.49 ea
Item #
Size Price
57283 Small $0.80
57284 Large $2.20
Candle Making Equipment
Item # Size Price 5pcs 10pcs
046161 25ml $1.99 ea $1.59 ea -
046164 10ml $1.09 ea $0.93 ea $0.92 ea
Wick Trimmers
Stainless steel. Use to keep your wick trimmed to ¼” while your
candle burns, Use for cutting charred burnt wick only.
*will not cut raw wick*
Item # Price
77000 $9.95 ea
Wick Puller
Use to pull unwaxed wick through the wick hole in a candle
mold.
Item # Price
00383 $2.99 ea
Item#
Price
COOKER $35.00
Cooktop - Single Burner
120V 1000W plug-in cooktop. Variable temperature control.
Always melt wax in a double boiler, not on direct heat.
#GD20
20PCS
$2.50
#GD120
120PCS
$7.50
#GD1000
1000PCS
$36.50
Item#
Price
9437 $65.00
Cooktop - Single Cast Iron Burner
120V 1500W plug-in cooktop. Variable temperature control.
Stainless steel with 7.4” solid cast iron plate.
Always melt wax in a double boiler, not on direct heat.
Glue Dots
High strength double sided permanent adhesive glue dots
secure wick tabs to candle vessels. Apply with pressure to
ensure a secure bond.