| 1) Cut one smooth beeswax sheet into 4 equal
pieces, each measuring about 2 1/8" wide x 16" long |
 |
| 2) now cut each strip into pieces 1
1/4" wide - you'll get 12 from one strip |
 |
| 3) it helps to fold the edge on a ruler
before beginning to roll the candle - make sure it's the longer edge so the candle is 2 1/8" tall |
 |
| 4) cut a piece of #5/0 wick 2.5" long
and lay it along the folded up edge, leaving the extra out one end, then fold the edge of the wax over the wick |
 |
| 5) roll the wax firmly between your thumbs
and fingers; press the seam firmly when finished to seal it |
 |
| 6) the wick should be about 1/4" long, trim if necessary before lighting |  |