BEE HIVE CANDLES

WICKS & WAX
BEE HIVE CANDLES

Candle measures approx 2.5" dia x 3" tall and burns ~ 6 hours

Supplies needed to make 1 candle:

1 Honeycomb Beeswax sheet (Natural or Stuart Gold)
3.5" of #2 square braid wick

Instructions:

1) Place the beeswax sheet on a cutting mat or piece of cardboard
2) Using an exacto knife cut the sheet into 5 pieces using the measurements below
3) Gently warm the strips of beeswax with a hairdryer to make them easier to roll
4) Lay the wick along the 3" edge of piece "A" with 1/2" sticking out the top
5) Fold the edge of the wax over the wick and start to roll. Make sure to keep the straight edge
(bottom of the candle) even. Use firm even pressure to roll
6) Take piece "B" and line the 2.5" edge to the 2.5" seam of the piece you've just rolled
7) Add pieces "C", "D" and "E" in the same manor. When finished, the end of piece "E" will be
at the bottom of the candle. Press this firmly to seal it in place

ALWAYS PLACE CANDLES ON A HEAT-SAFE SURFACE.
KEEP WICK TRIMMED TO 1/4" WHILE BURNING.
NEVER LEAVE A LIT CANDLE UNATTENDED.